Faqs

Yes, you may obtain a quote for by sending Schematic to [email protected] Through years of working with our in-house electrical and manufacturing engineers, we’ve accumulated the know-how to [...]

Any Special instructions should be included at the time an order is submitted. Often you will provide these instructions in the Assembly Instructions document. Depending on the need for visual [...]

Silkscreen is not required, but it is preferred. In order to verify component placement and rotation, board submissions without silkscreen require some other form of documentation. Board orders [...]

As part of our standard assembly and testing process, we X-ray BGAs, Leadless ICs and other parts having leads that can’t be examined with a microscope are also X-rayed.

Generally, RushPcb Inc can handle board size up to 20in x 24in, however our optimum working panel size is roughly 12in x 18in for sample runs & 18in x 24in for medium to large PCB production. [...]

Typically, we process prototype quantities to large production quantities. Give us a call at 1-408-496-6013 or email us at [email protected]. If you need regular production in quantities that [...]

Each order requires its own kit. Multiple kits may be sent in a single package, but please be sure each kit is clearly marked. Parts mutually used on two or more jobs should be clearly marked [...]

Mostly, we do not carry any inventory. Only for a few customers, who we work with closely, do we carry any inventory items.

The same part number listed on your bill of materials should be clearly marked on each bag, tray, etc. Depending on the assembly service you choose, we can work with: 1. Tape cut to 6” min length [...]

We need the files in the Gerber RS-274X format. For assembly, we need at a minimum: • Silkscreen • Copper (trace layers) • Solder paste layers Preferably, as if you were sending them in for [...]